Reboot (reboot the product)

Reboots the product.

Syntax: (see Command structure)

reboot [watchdog]

If the watchdog parameter is included then the system will lock into an infinite, unresponsive loop whilst the watchdog timer expires. The expiration takes several seconds, after which the system will reboot.

If the reboot command is issued without a parameter, the reboot command is executed immediately.

Response: (see 'Response structure)

>> 

The reboot command is a soft reset which will only affect software. To perform a full product reset you will need to power-cycle the hub.

Rebooting sets the 'R' (rebooted) flag, which is reported by the health and state commands.