rgb_led
The rgb_led command is used to set the RGB LED levels on one or more ports to the value specified.
Syntax: (see Command structure)
Copy
rgb_led p level| Override parameter | Description |
|---|---|
| p | A single port or a range of ports. |
| level | An eight digit hex number that represents the levels to set for the RGB LEDs. in the format 'aarrggbb' |
| level parameters | Description |
|---|---|
| aa | Sets the maximum level for the LEDs on this port, the other LEDs are all scaled from this setting |
| rr | Sets the level for the Red LED |
| gg | Sets the level for the Green LED |
| bb | Sets the level for the Blue LED |
Response: (see Response structure)
Copy
>>