Port LED States
Your Product Name has inbuilt LEDs
used to show the state of the ports, devices and the power state. These LEDs can be
configured to support your use case; this can be controlled either by
using the API to send commands directly or through separate software.
When the hub is powered on all the available LED's will flash once and then revert to the default behaviour mentioned below.
Table 5-20
| Colour
|
Behaviour
|
|
Solid Green |
Device connected and port is on
|
|
Yellow |
Hub is resetting |
| Red |
Fatal error |
| LED Off |
No Device is detected |
Table 5-21
|
Colour
|
Behaviour
|
|
Flashing Red |
Port is in charge mode and is profiling the device
|
| Red |
Port is in charge mode and is charging
|
|
Yellow
|
Port is in sync mode and has a host connection
|
| Green |
Port is in charge mode and the device has reached the charged
threshold
|
| LED Off |
No Device is detected |
Table 5-22
|
Colour
|
Behaviour
|
|
Flashing Red |
Port is in charge mode and is profiling the device
|
| Red |
Port is in charge mode and is charging
|
| Green |
Port is in charge mode and the device has reached the charged
threshold
|
| Blue |
Port is in Sync mode and has a host connection
|
| LED Off |
No Device is detected |