Managing Ports & Your OEM-PDSync-C4
Each port on your OEM-PDSync-C4 can be managed either individually, or all together. You can turn the ports off and on, change the port mode, or change various other settings applicable to the OEM-PDSync-C4 more information can be found in the Cambrionix Connect section under Internal hub settings. This can be done through Cambrionix Connect, the CLI or by connecting to the hub via the API.
Port Modes
| Sync | Turn specific ports or the whole hub to sync mode |
| Off | Turn specific ports on or off or switch the whole hub on or off (no power and no data channels open, mimics unplugging the device) |
Switching port modes
You can switch between port modes by using Cambrionix Connect, the CLI or by connecting to the hub via the API. If you switch a port off then this will stop any connection taking place to the USB device and would mimic unplugging the USB device completely from the host system.
Charging Profiles
To ensure attached devices charge at their optimum rate, our smart USB hubs come with the below intelligent charging profiles built in:
| 1 | 900mA |
| 2 | 1.5A |
| 3 | 3A |