Internal Hub Settings
Within your hub, there are some specific controllable settings called 'internal hub settings'. These are a variety of different settings for your ThunderSync5-C16-PD.
You can navigate to the Internal hub settings by opening Cambrionix Connect and selecting the hub you want to connect to. Once you have chosen the connected hub, navigate to the below icon on the top right of the screen from Cambrionix Connect
Figure 10.1
Once you have pressed this you will be taken to the Internal hub settings section where you can view and change the Internal hub settings, including reverting back to default factory settings.
| Setting name | Description | Default value |
|---|---|---|
| Local Name |
Optional, "Local Name", set by the user. Limit of 31 characters. This name will appear in the device's system information if set. |
Empty |
| Attach Threshold (mA) |
The attach threshold is the device current (mA) level at which the hub can determine that a device (iPhone etc.) has been attached to a port. The attach threshold may need to be increased if the device (iPhone etc.) is connected to a Cambrionix port with a cable which includes an LED or other electronics. It may also need to be increased if you are using a device (iPhone etc.) with a 3rd party sled/holder/case (such as a barcode scanner or battery pack) which contains electronics or charging pass-through |
10 |
| Flags |
Change various flags |
None selected |
| Stagger Delay (ms) |
Introduce a delay between ports turning on when either host is detected or mode is switched to Sync. 0-9999ms |
3000 |
| Stagger Offset (ms) |
An additional delay to add before starting the staggered process. 0-9999ms |
0 |
There is more information on the Internal hub settings and how to manage them in our CLI manual. which can be found at the link here.