5.0.15 Charts

When you install the Connect setup, providing you do not deselect any options, you can access charts and information on the hub charging performance and health.

If you click on the Dashboard section on the menu and select a hub, you will be taken to the Ports overview page. Select the chart symbol from this page in the top right corner to enter this section.

You can adjust the time scale on each chart by using the drop-down on the top right-hand side. This can be changed from 30 minutes up to 1 year. You can use this to view historic charging information.

You can also zoom on the charts; this can be done by clicking on the Zoom button at the bottom of a chart and then dragging on the graph to select a specific period to zoom in to. Alternatively, you can use the scroll wheel on your mouse for fine-tuning. There is reset button for going back to the default view.

Hub charging performance

This chart will show the hubs charging information. On the chart, the Y axis will show the charging current in mA, and the X axis will show the time.

Using this chart, you can see the different devices that are connected and their charging rates over time. A different coloured line will represent each device.

Hub health history

This chart will display the hub health history. There are two different Y axis on this chart, the left side will show voltage in V, and the right-hand side will show the temperature in Celsius. The X-axis shows the time.

Using this chart, you can see the temperature of the hub, the 12V internal voltage and the 5V internal voltage. If the temperature or voltage goes above or below specific parameters a flag will be raised, and the hub may switch off. More information on exact values can be found in individual product user manuals, which can be found in the link below.